Savings Calculator

Number of people in your Home or Business

Save up to

Per Year

See how much you can save!

An average flush takes about SIX litres of fresh water and shockingly, toilets account for 30% of all water consumption in a typical UK household. (Source: Waterwise).
 
But with the Flush and Save toilet valve, this volume can be reduced – significantly. 

That’s because this water-saving valve can cut the water consumption of a modern, dual-flush toilet by 50% (even more for toilets made pre-2001). So instead of needing six litres per flush, you’ll only need three.
 
And when your toilet uses 50% less water, your water bill will reduce too.

What is the Flush and Save Toilet Valve?

Flush and Save is been designed and produced in the UK.

Its patented one-way, non-return valve opens so waste can leave, then immediately shuts to prevent the backflow of effluent. In turn, up to 50% less water is required to flush a toilet and keep it clean.

Click image to enlarge

How is the valve different to a Cistern Displacement Device (CDD)?

CDDs are NOT as effective as the Flush and Save Valve – here are three reasons why:

1. Save more water

CDDs are only suitable for use in toilets fitted before 2001. When used inside these older, 7.5 litre cisterns, a CDD can save just one litre per flush.

In comparison, the flush and Save valve CAN save water in any aged toilet – even modern dual-flush cisterns. Plus, the valve saves THREE litres per flush (not just one) – and the water savings are even greater for pre-2001 toilets.

2. Ensure your toilet flushes clean – every time

When you reduce the flush volume, it’s not uncommon for a toilet to NOT flush clean. In turn, you need to flush again (and so use MORE water, not less). This does not happen when you fit a Flush and Save valve. That’s because the patented one-way, non-return valve opens so waste can leave, then immediately shuts to prevent the backflow of effluent into the toilet.

3. Avoid backflow

With a reduced flushing force, there’s a greater risk that toilet waste may not move far enough down the waste pipe. In turn, this presents a backflow risk (especially when water levels become unusually high). This does not happen with the Flush and Save valve. That’s because the non-return valve keeps any effluent safely in the waste and away from property.

Other Benefits

In addition, the Flush and Save Toilet Valve is…

  • Legally compliant: The valve complies with all UK legislation and does not interfere with the underground drainage network
  • Easy to install: The valve is so quick and easy to install, even a DIY enthusiast could do it.
  • No maintenance: No regular upkeep is required. In addition, the valve has a lifespan of 30+ years
  • An effective rodent-proofing solution: The non-return value prevents any rodents entering property from the sewers. In fact, this valve is the only product in the world that seals that last point of entry into domestic and commercial property from the sewer

What to do next?

If you’d like to save money by cutting water usage in your home or commercial premises, buy your Flush and Save Valve(s) today.

Individual Flush and Save Toilet Valves retail at just £39.99, but generous discounts are available for bulk purchases.

Call us on 0121 400 0522 or to get a personalised quote for your commercial premises Please Contact us.